|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Was very fast and accurate service. Just what I needed. I recommend to everyone.
 ;
Very good scan quality, only PC Board scan not enough contrast.
;
First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
;
Good service manual. I gat all I want. Copy is good, but could be better. All clear and useful. I sincerely recommend.
;
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
Reinstalling the Encoder Strip
1 Ensure that the encoder strip is oriented with the transparent area down. 2 Feed the strip through the apertures in the cartridge carriage assembly.
3 Use a washer and screw to attach the encoder strip to the bracket on the left side of the plotter. Tx 10
4 Use a washer and screw to attach the encoder strip to the bracket on the right side of the plotter.
5,5 mm
Ensure that the metallic tensioner is correctly positioned in the holder.
C4705-90000
Removal and Replacement
6-29
|
|
|
> |
|
